LOST VAPE PARANORMAL 200W DNA250C BOX MOD

LOST VAPE PARANORMAL 200W DNA250C BOX MOD

WARNING: Some products on this site contain nicotine which is an addictive substance.

LOST VAPE PARANORMAL 200W DNA250C BOX MOD

The Lost Vape Paranormal 200W DNA250 Color Box Mod just hit the NZ. LostVape Paranormal mod powered by DNA 250C chip has a new feature of replay mode that makes vaping even more enjoyable. It gives you a brand new experience of vape.  The Paranormal is powered by dual 18650 batteries (sold separately) inserted through the sliding lock hinged battery bay on the bottom, with 24K gold-plated contacts that ensure a high level of conductivity.

NOTE: The colour will be chosen randomly (Silver Pearl, Silver Black Red, Silver Black Grey, Gunmetal Black Red, Gunmetal Black Grey) due to limited stocks

$295.00
Availability: In stock
SKU
6549170
or 6 interest-free payments of $49.17 with

Product Description:
The Paranormal DNA250C uses Evolv's most intense DNA 250 Color Chipset, highlighting a progression of creative usefulness - Wattage Control, Temperature Protection, Replay Function, Boost Mod, Preheat, and Onboard Programmable Multicolor LED. The Paranormal DNA250C highlights a mind-boggling 98% yield productivity output, enormous range with the greatest wattage yield of 200W, full temperature control, and combined with Escribe programming for a definitive innovation that consolidates effectiveness and ability.

Lost Vape Paranormal 200W DNA250C TC Box Mod Features:

  • Dimensions - 91.5mm by 55mm by 27.5mm 
  • Dual High-Amp 18650 Battery Platform - (Sold Separately)
  • Patented Evolv DNA250 Color Chipset
  • Wattage Output Range: 1-200W
  • Temperature Range: 200-600F
  • Min Kanthal Resistance: 0.1ohm
  • Min Temperature Resistance: 0.08ohm
  • Preheat Functionality
  • Replay Functionality - Temp-Sensing & Tuning of Temperature Control
  • Boost Mode - Increase Initial Power Output and Ramp-Up Time
  • Intuitive OLED Display
  • Die Cast Zinc Alloy Chassis Construction
  • Genuine Leather Battery Door
  • Highly Responsive Three Adjustment
  • Reverse Protection System
  • Upgradeable Escribe Software
  • 98% Output Efficiency
  • Cell-by-Cell Monitoring
  • Cell Balancer
  • Atomizer Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Step Down Protection
  • Onboard Reverse Polarity Protection
  • Micro-USB Port - 2A Balance Charging Capability
  • Stainless Steel 510 Thread Point
  • Spring-Loaded Nickel Plated Brass 510 Connection

Includes:

  • 1 Paranormal DNA250C Mod
  • 1 USB Adapter
  • 1 MicroUSB Cable
  • 1 Warranty Card
  • Instructional Manual

How to use

     DISPLAY OF DNA 250C: To wake the device from power off state, tap the Fire button. To generate vapour, press the Fire button. To change the wattage setting for more or less vapour, click or hold the Up and Down buttons.

     ERROR MESSAGES: The DNA 250C will indicate a variety of error states.

  • Check atomize: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.
  • Weak Battery: The battery is deeply discharged and needs to be charged, or is damaged. If this happens, the DNA 250C will not fire the atomizer. The Check Battery message will continue to display for a few seconds after attempting to fire the device. User should remove and replace the battery.
  • Shorted: The atomizer or wiring are short circuited
  • Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this happens, the DNA 250C will continue to fire, but will not be able to provide the desired wattage. The Ohms Too Low message will continue to display for a few seconds after the end of puff.
  • Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this happens, the DNA 250C will continue to fire, but will not be able to provide the desired wattage. The Ohms Too High message will continue to display for a few seconds after the end of puff.
  • Temperature Protected: The heating coil reached the maximum allowed temperature during the puff. If this happens, the DNA 250C will continue to fire, but will not be able to provide the desired wattage
  • Weak Battery: The battery needs to be charged, or a higher amp rated battery needs to be used. If this happens, the DNA 250C will continue to fire to atomizer but will not be able to provide the desired wattage. The Weak Battery message will continue to display for a few seconds after the end of the puff
  • Return to Researcher: The DNA has reached a limit configured by a researcher.
  • Too Hot: The DNA 250C has on-board temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive

 

Write Your Own Review
You're reviewing:LOST VAPE PARANORMAL 200W DNA250C BOX MOD
Your Rating