The Lawless Ricky R80 with Ritzy 4 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5 to 50 Celsius or 23 to 122 Fahrenheit ). Based on the popular EC coils, an upgraded EC2 series coil is introduced to this vape kit for ultra vaping experience. The Ricky R80 skillfully packs a big 0.91 inch screen, 2A quick charge capacity and an internal sustainable 3000mAh battery in a compact e cigarette box mod. It can fire up to 80 watts and has a big fire bar for added convenience.
NOTE: The colour will be chosen randomly (Silver, Blue, Black) due to limited stocks.
The LawLess Ricky R80 is a new e-cigarette box mod that skilfully packs a big 0.91-inch screen with an internal sustainable 3000mAh battery in a compact unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging. The Ricky R80 also comes with an upgradable firmware, as well as multiple features including temp protection for charging, optional interfaces, preheat function and custom logo.
Simply connect the Nora Nano USB cable into a computer or a wall adapter
Big 0.91 Inch Screen with Optional Interfaces, Featuring a big 0.91 inch screen, the Ritzy R80 also has three switchable display interfaces for you to choose from: Puff interface, Second interface, and Current (amp) interface.
Sustainable Internal Battery with Powerful Output The Ricky R80 comes with a sustainable 3000mAh battery and is capable of outputting a max power of 80 watts for your whole day vaping experience.
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
RETRACTABLE TOP FILL
Slide the top cap with drip tip back to reveal the fill port.
How to use
Power on/off: Press the fire button 5 times in quick succession tu turn on/off the device. Keep holding the fire button to take a puff when the device is powered on.
Stealth on/off: Press the fire button and “-“ button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button once to see the current setting
Adjustment buttons lock/unlock: keep pressing “+” button and “-“ button simultaneously for two seconds when the device is powered on, then the adjustment buttons will be locked and the screen will display “Key Lock”. In the same way, the adjustment buttons can be unlocked and the screen will display “Key Unlock”. Through this operation, you can protect the buttons from unintentional presses and prolong their lifespan
Switch display mode: keep pressing “+” button and “-“ button simultaneously for two seconds when the device is powered off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation
Switch display interface: in power-on state, choose VW mode: keep holding “+” button and fire button till the current interface flashes; when its flashing, press “+” or “-“ button to switch among different interfaces; finally press fire button once to confirm the interface you choose.
Puff/second reset function: in power-on state, choose VW mode; keep holding “+” and fire buttons till the puff or second interface flashes, and then keep holding “+” and “-“ buttons till the puffs or seconds are reset to “0”.
Preheat function: in power-off state, keep holding “+” button and fire button till the M1 mode appears; press the fire button 3 times to “Power” and press “+” or “-“ button to adjust the wattage of preheat; press the fire button again to “Time” and press “+” or “-“ button to adjust the second of preheat or to turn off the preheat function
Switch vaping modes: when the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the “+” or “-“ button to switch among VW, Bypass, TC-NI, TC-TI, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button once or stay in the interface for about 10 seconds to confirm the vaping mode you choose
1) VW mode:
When set in VW mode, the vice can support a coil whose resistance is within the range of 0.1ohm-3.5ohm.
Adjust wattage: in this mode, the output wattage can be adjusted from 1W to 80W by pressing “+” button or “-“ button, “+” button to increase and “-“ button to decrease. Long press “+” or “-“ button can rapidly increase or decrease the wattage level
2) Bypass mode:
When set in Bypass mode, the device can support a coil whose resistance is within the range of 0.1ohm -3.5ohm. Direct output voltage system is applied in this mode. The higher the battery level, the higher the output voltage.
3) TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) Mode:
When set in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, the device can separately support Nickel 200, Titanium, and Stainless Steel 316 coils. In TCR(Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range. (Resistance range of coil: 0.05ohm-1.5ohm)
The Setting of TCR Mode (M1,M2,M3): when the device is powered off, keep pressing the fire button and the “+” button simultaneously, then you will enter into the TCR(M1,M2,M3) set menu:
in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, the output wattage can be adjusted from 1W to 80W. Press the fire button 4 times in quick succession to enter the wattage setting menu and press “+” or “-“ button to increase or decrease the wattage level. Keep pressing “+” or “-“ button without looseness to rapidly increase or decrease the wattage level
Adjust temperature: in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, temperature can be adjusted from 100-315*C or 220-600*F by pressing “+” or “-“ button, “+” button to increase and “-“ button to decrease the temperature setting by 5*C or 10*F. Keep pressing “+” or “-“ button without looseness can rapidly increase or decrease temperature setting.
Shift between *C and *F: if you increase the temperature to 315*C and continue to press the “+” button, the temperature reading will automatically change to the lowest Fahrenheit(220*F). Equally,
If the temperature is set at the lowest Fahrenheit 220*F) and you continue to press the “-“ button, the temperature reading will automatically change to the highest Celsius (315*C)
Lock/Unlock resistance: in in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode, when the device is powered on, keep pressing the fire button and “+” button simultaneously for two seconds to lock or unlock atomizer “base resistance”. The lock sign will appear when resistance is locked and “Ω” symbol will come back when unlocked
1.Please lock the resistance when the coil is at room temperature so that the device can display the correct “base resistance”
2. In resistance lock mode, when you remove the coil and then put it back, the device can maintain the same “base resistance” although the coil resistance may increase due to the rise of temperature. In resistance unlock mode, when you remove the coil and then put a coil back, then screen may display “New coil up same down” as the coil resistance may increase within certain range. If it is the same coil, press the “-“ button and if it is a new coil, press the “+” button. But please unlock the resistance when you want to change an atomizer or a coil of different resistance
3. When using a common coil or a coil whose resistance is above 1.5ohm in in TC-Ni/TC-Ti/TC-SS/TCR(M1,M2,M3) mode by mistake, the device will automatically switch back to VW mode
How to charge:
The battery power indicator on the screen of the Ricky R80 will keep flashing when the remaining power of the battery is less then 10%. The device can be charged through USB port via a micro USB cable.
Firmware Upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable
Atomizer Protection: each time when vaping time exceeds 10 seconds; the output shuts off automatically with “Over 10s” display on the screen.
Atomizer Low Alert: when the resistance of coil is lower than 0.1ohm in VW/Bypass mode or lower than 0.05ohm in TC modes, the screen will display “No Atomizer” when there is no atomizer connected
Low-voltage Protection: when the voltage of the device is below 3.3V, the OLED screen will display “Lock” and the output will cut off automatically. Charge the device to reactivate it.
|Product Name||Lawless Ricky R80 80W Kit|
|Colour - Subject to availability||N/A|
This Website requires you to be 18 years or older
We're Sorry !
You must be 18 years of age or older to enter this site.